Mini Add-A-Battery Kit 65A - P/N #7649

Mini Add-A-Battery Kit 65A - P/N #7649
Mini Add-A-Battery Kit 65A - P/N #7649
Brand: Blue Sea Systems
Product Code: 7649
Sku 632085076498
Price: $AU164.58
Qty:     - OR -   Add to Wish List
Add to Compare

The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source

The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave.

Dual Circuit Plus™ Battery Switch

  • Simplifies switching
  • Isolates engine and house circuits
  • Combines batteries for emergency starting
  • Tin-plated copper studs for maximum conductivity and corrosion resistance

Simultaneously switches two isolated battery banks or combines battery banks to all loads

  • Make before break contact design allows switching between battery banks without power interruption
Switch Type Dual Circuit Plus
Color Red
Switch Positions 4
Battery Combine Yes
Alternator Field Disconnect No
Maximum Voltage 32V DC
Continuous Rating 300A
Intermittent Rating 450A (5 min)
Cranking Rating 10 sec 1000A
Cranking Rating 1 min 650A
Battery Inputs 2
Cable Clearance For 4/0 AWG Cables 1.12in (28.45 mm)
Cable Size to Meet Ratings 4/0 AWG (120mm²)
Mounting Holes Accept 1/4" (M6) Screw
Terminal Stud Size 3/8" - 16 (M10)
Terminal Stud Torque 120 in-lb (13.56 Nm)
Weight 0.80lb (0.36 kg)

ACR Automatic Charging Relay

  • Automatically combines batteries during charging
  • Isolates batteries during engine cranking and when not charging
  • Shares the charge between two batteries more efficiently than a battery isolator
  • Allows efficient dual battery charging without needing regulator adjustment or rewiring

The Mini Automatic Charging Relay (M-ACR) is designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard engines.

Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from the engine circuit during engine cranking, protecting the house circuit from voltage sags and spikes.

The compact design allows for three mounting styles: surface, rear, or panel mount. The M-ACR is also available as a module in a Custom 360 Panel.

Features
  • Senses charging on two battery banks
  • Pull off and snap on insulating cover
  • LED indicates ACR status
  • 1 ∕4" x .032" male quick connect terminal for ground
  • 7∕ 16" (11 mm) stud length to accept multiple cable terminals
  • Waterproof – rated IP67 for temporary immersion
Nominal Voltage 12V DC
24V DC
Start Isolation Yes
Amperage Operating Current 90mA (Combine)
15mA (Open)
Continuous Rating 65A
Intermittent Rating 115A (5 min)
Cable Size to Meet Ratings 6 AWG
Maximum Cable Size 1/0 AWG
Terminal Stud Size 1/4" - 20 (M6)
Terminal Stud Torque 60 in-lb (6.78 Nm)
 
Relay Contact Position
Combine 30 sec 13.6V DC
Open 10 sec 12.35V DC
Open 30 sec 12.75V DC
Open High 16.0V
Under Voltage Lockout 9.5V
Weight 0.95lb (0.43 kg)
© Blue Sea Systems 2020
Proudly powered by OpenCart and CsillámVilág